Just putting this out there to see if anyone else has noticed node or hardware issues with MyRSK recently? I just tried to upgrade some packages on my VPS with them only for it to complain about missing files.
DMesg then showed some interesting lines...
[684530.803118] hrtimer: interrupt took 27960048 ns [831191.343575] INFO: rcu_preempt self-detected stall on CPU { 0} (t=106988 jiffies g=80237 c=80236 q=54) [831191.343575] sending NMI to all CPUs:
And...
[831561.320578] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [831561.320720] ata1.00: failed command: WRITE DMA [831561.320815] ata1.00: cmd ca/00:80:d0:6e:33/00:00:00:00:00/e0 tag 0 dma 65536 out res 40/00:01:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [831561.321083] ata1.00: status: { DRDY } [831561.321325] ata1: soft resetting link [831561.473991] ata1.01: NODEV after polling detection [831561.474760] ata1.00: configured for MWDMA2 [831561.474767] ata1.00: device reported invalid CHS sector 0
... on top of what appears to be data loss. Luckily I'm not using the VPS for anything that matters, but I was curious to see if anyone else had noticed these anomalies.
http://ift.tt/1dvHQ0Z
0 comments:
Post a Comment